1. Don't pull the actual wire harness as well tightly throughout assembly (especially within the horizontal direction), avoiding the automobile in the bumpy condition, causing the positioning of the actual fixed point from the wire harness to become displaced, leading to an immediate increase within the distance between your two set points, therefore lengthening the actual wire harness. Causes the interior contact from the harness in order to pull off/virtual link, change the actual wire guidelines, and actually break the actual wire.
2. After the actual harness is actually assembled, there must be enough clearance close to it to ensure it isn't pressed by other areas or captured by other areas and their own fasteners. Avoid problems fo, for example, rounding brought on by the touch insulation becoming pinched, put on or damaged.
3. Don't arrange connectors using the same design and colour. Avoid mis-insertion throughout assembly as well as damage makes use of and home appliances.
4. The connectors they fit in a good easy-to-find placement, in a situation where the actual hands as well as tools are simple to operate. To be able to facilitate examination and upkeep, it is essential to consider along the wires from the electrical device based on the actual set up conditions. When the electrical gadget is installed within an easy-to-operate placement, the wire could be omitted in order to directly link the connector towards the component; when the electrical gadget is installed inside a concealed placement, and the actual maintenance as well as disassembly is actually difficult, the wire from the electrical device may be used as required. The duration is properly increased so the connector is positioned ready convenient with regard to inspection as well as maintenance.
Within the actual procedure process, along with following these types of points to handle the wire harness set up work, we should continue to obtain the problem as well as study more methods to solve the actual hidden dangers within the wire harness set up.